Abstract:
+e run-on flat tire is an important technology in the area of vehicle safety technology. Nowadays, traveling by a personal vehicle
from one place to another has increased due to the increase in the global economy. +e main problem that is faced while traveling is
tire puncture. +e tire may get punctured by any sharp objects on the road such as screws and iron pins that traps the tire surface. A
situation like this may be overcome by the usage of the drive on a puncher tire device which will be used to reach the destination
without any need for a puncher shop. Using this device will reduce the damage of the tire and tube. +is device is portable and can be
placed in a vehicle itself. For this reason, a design has been developed by the CATIA 3D experience. +e drive on a puncher tire device
was designed using the software developed by the Dassault systems named CATIA 3D experience. Aluminum alloy was chosen as the
base material to design and simulate this product. Also, the network distribution simulations were used to develop the mathematical
equations to check the adequacy of the model. +is device is very useful while traveling long distances if any puncher will occur. +e
sensors were attached to the product to receive the signal from the vehicle, so that the vehicle will run smoothly for a short distance.
Drive on a puncher tire will be suitable for both two- and four-wheeler vehicles and also useful for all the areas like villages, towns,
panchayats, and cities. If the tire is puncher, we cannot drive the vehicle; hence, a skating device is fixed at a tired bottom, which is
used to move the vehicle. +e proposal will be beneficial for a huge number of people who own two and four wheelers. +is design
and simulation will address the problem of the two- and four-wheeler owners traveling long distances.
