Recently added

Relationship between the heterogeneity in mechanical properties, bone density and composition parameters of cortical bone to design and develop bone scaffolds and implants: Analysis of bone microstructure Article

Kalsi, Sachin; Singh, Jagjit; Sharma, N.K.; et al. (Elsevier B.V, 2024)

Bone is heterogeneous and anisotropic because its mechanical characteristics vary by anatomic location and loading direction. Previous research established a correlation between bone density, mineral, organic content, ...

Predictive modeling of MRR, TWR, and SR in spark-EDM of Al-4.5Cu–SiC using ANN and GEP Article

Debnath, Shantanu; Sen, Binayak; Patil, Nagaraj; et al. (AIP Advances, 2024)

In this study, Al-4.5Cu alloy was reinforced with varying weight percentages of SiC particles (2%, 4%, 6%, and 8%) to create metal matrix composites via the stir casting method. The formation of intermetallic compounds ...

Minimum quantity blended bio-lubricants for sustainable machining of superalloy: An MCDMmodel-based study Article

Sen, Binayak; Kothapalli, Sunil Kumar; Kumar, Raman (AIP Advances, 2024)

Theimperative shift toward sustainability has driven contemporary scholars to explore the lubricating and cooling properties of vegetable oils in traditional metal-cutting processes. Palm oil, as an environmentally ...

INNOVATIVE COMPOSTING PROCESS FOR ENHANCING ORGANIC WASTE MANAGEMENT IN URBAN AREAS Article

JAISANKAR, S.; ARPUTHABALAN, JESWIN; SURESH, S.; et al. (Composting strategies and efficiency, 2024)

Towns and cities produce large quantities of organic waste which is problematic for waste management structures. This work assesses contingency of new approaches to composting in the fight against the management of ...

Micro Hydropower Potential Assessment and Full Scheme Design of Chisiche River in Jimma Zone Thesis

Ayele, Meron Ketema (2024)

In Ethiopia, many remote villages or farms are still not connected to the national grid because of the high cost of distributing electricity. Micro-hydropower projects have proved to be an economically efficient ...

Design and performance Evaluation of solar thermal baking system using Scheffler reflector integrated with basalt rocks as energy storage for household Thesis

Aliyi, Abduselam (2024)

This study investigates the use of a solar thermal baking system with a Scheffler reflector and basalt rocks as an energy storage medium to meet the increasing energy demands for baking while minimizing environmental ...

Design and CFD-Based Performance Optimization of Small-Scale Solar Meat Dryer with Curved Obstacles Thesis

Tasew, Desta (2024)

Meat and other food items can be dried to preserve it for a longer time. Indirect solar dryers are ideal dryers for meat as it is cost-effective and easy to manufacture. Moreover, higher-quality dried meat is produced ...

Strength and Stiffness Analysis of Modified chassis designs: A Case Study on Bishoftu Bus in Ethiopia Thesis

Meseret, Abel Ermias (2024)

Chassis is the “backbone” of every vehicle. It is the main component of vehicle in keeping the structural integrity. Ethiopia currently is far behind in vehicle manufacturing, with the capability of only assembling ...

DESIGN and STRESS ANALYSIS of THIN WALLED CYLINDRICAL PRESSURE VESSEL BY USING ASME BOILER and PRESSURE VESSEL CODES and FINITE ELEMENT METHOD Thesis

LEMMA, ZEWDITU (2024)

As the demand for liquefied petroleum gas (LPG) continues to increase worldwide, more LPG facilities are being constructed. However, the design and manufacture of pressure vessels used to store dangerous liquids or ...

Enhancing laser surface texturing with driving training-based optimization: A metaheuristic approach Article

Shivakoti, Ishwer; Diyaley, Sunny; Das, Partha Protim; et al. (Elsevier B.V., 2024)

This paper investigates the capability of Laser Surface Textruing (LST) to induce texture on Ti-6Al-4V, aiming on optimizing process parameters viz. average power, pulse frequency, scanning speed, and gas pressure using ...

Development and wear resistivity performance of SiC and TiB2 particles reinforced novel aluminium matrix composites Article

Bhowmik, Abhijit; Sen, Binayak; Beemkumar, N.; et al. (Elsevier B.V., 2024)

their exceptional strength-to-mass ratio and resistance to high temperatures. This study investigates the devel opment and wear resistivity performance of Aluminium Matrix Composites (AMCs) reinforced with SiC and TiB2 ...

Unlocking the potential of biochar derived from coffee husk and khat stem for catalytic tar cracking during biomass pyrolysis: characterization and evaluation Article

Afessa, Million M.; Olu, Femi Emmanuel; Geleta, Wondwosen Sime (Biomass Conversion and Biorefinery, 2024)

Biochar has the potential to catalyze and accelerate the decomposition process during biomass pyrolysis and tar cracking. However, limited research has been done so far on its suitability as a catalyst. This study aims ...

ECOLOGICALLY FRIENDLY OXIDATION PROCESSES DEEP LEARNING MODEL TAKING AIM AT ENVIRONMENTAL POLLUTANTS Article

HARSHA, ARIGELA SRI; POOSAPADI, DHIVAKAR; GANDHI, R. ASHOK; et al. (Oxidation Communications, 2024)

Pollution by industrial effluent, chemical fertilisers, and drugs has turned into a very relevant problem in the world today that is posing a very great danger to water sources and its users. Effective and popular ...

Advancements in Wire Arc Additive Manufacturing of Functionally Graded Materials: Optimizing Compositional Gradients and Mechanical Performance: An Overview Article

Avula, Manideep Roy; Sailesh, Ashwin; Padhi, S. N.; et al. (Nanotechnology Perceptions, 2024)

Wire Arc Additive Manufacturing (WAAM) is an advanced 3D metal printing technique that enables the fabrication of complex, large-scale components with minimal material waste. Its ability to control deposition parameters ...

Certificate of Registration for a UK Design Article

Ashok, Nagaraj; Natarajan, Aravindan; Rangaswamy, Bharath Kumar Bidare; et al. (2024-07)

Performance evaluation of machine learning algorithms in predicting machining responses of superalloys Article

Bhowmik, Abhijit; K. N., Raja Praveen; Bhosle, Nilesh; et al. (AIP Advances, 2024)

This study explores the application of machine learning algorithms—gene expression programming (GEP), adaptive neuro-fuzzy inference system (ANFIS),andartificial neural networks (ANN)—topredictmachiningresponsesduringt ...

Unlocking the potential of titanium and its alloys: A mini-review on innovative surface modification techniques Article

Shivakoti, Ishwer; Bhowmik, Abhijit; Santhosh, A. Johnson (AIP Advances, 2024-10)

Titanium and its alloys are widely utilized in various fields, such as biomedical and aerospace, and in other industrial applications. However, its surface modification is essential to further enrich its properties to ...

Guar Gum: Superabsorbent Hydrogels for Dye Remediation Article

Pa, Ishika; Chopra, Lalita; Ganesan, Subbulakshmi; et al (2025-01-06)

Hydrogels are 3- dimensional polymeric network structures that can absorb a large amount of water. The hydrogels possess re markable hydrophilic characteristics, biocompatibility, and a high swelling ratio making them ...

Quantum behaved binary gravitational search algorithm with random forest for twitter spammer detection Article

Sharma, Kanta Prasad; Lal, Gendal; Shukla, Madhu; et al. (Elsevier B.V, 2025-01-09)

The emergence of social media platforms like Twitter has significantly changed the landscape of communication by increasing accessibility for widely disseminating official announcements, professional interactions, and ...

Casting of particle reinforced metal matrix composite by liquid state fabrication method: A review Article

Bhowmik, Abhijit; Kumar, Raman; Beemkumar, N.; et al. (Elsevier B.V, 2024-10-15)

The purpose of this study is to investigate the characterization of Metal Matrix Composite (MMC), using liquid state fabrication technique. The paper also considered the latest trend of MMC. The selection of the matrix ...

Recently added

Mechanical Engineering: Recent submissions

Search IR

Browse

All of IR

This Collection

My Account